HD2, please refer to section 19.1.1.
A Download button is for exporting a diagnostic report file required for system
investigation.
The second table shows the MAC address of each LAN/WAN interface connected.
If you encounter issues and would like to contact Pepwave Support Team (http://www.pepwave.com/contact/),
please download the diagnostic report file and attach it along with a description of your encountered issue.
In firmware 5.1 or before, Diagnostic Report file can be obtained at System > Reboot
19.1.1 GPS Data
The MAX HD2 automatically stores up to seven days of GPS location data in GPS eXchange format
(GPX). To review this data using third-party applications, click Status > Device and then download your
GPX file.
The Pepwave MAX HD2 exports real-time location data in NMEA format through its LAN IP address at
TCP port 60660. It is accessible from LAN or over a SpeedFusion connection. To access the data via a
virtual serial port, you have to install a virtual serial port driver. Visit
http://www.peplink.com/index.php?view=faq&id=294 to download the driver.
To Next Page
Loading...
