Pepwave MAX User Manual

http://www.pepwave.com
41
Copyright @ 2013 Pepwave
See Section 8.4 for configuration details.
Dynamic DNS
This setting specifies the dynamic DNS service provider to be used for the WAN based
on supported dynamic DNS service providers:
 changeip.com
 dyndns.org
 no-ip.org
 tzo.com
 DNS-O-Matic
Select Disabled to disable this feature.
Bandwidth
Allowance
Monitor
This option allows you to enable bandwidth usage monitoring on this WAN connection
for each billing cycle. When this is not enabled, bandwidth usage of each month is still
being tracked but no action will be taken.
See Section 8.5 for configuration details.
MTU
This setting specifies the Maximum Transmission Unit.
By default, MTU is set to Custom 1440.
You may adjust the MTU value by editing the text field. Click Default to restore the
default MTU value. Select Auto and the appropriate MTU value will be automatically
detected. The auto-detection will run each time when the WAN connection establishes
Connect to Any
Open Mode AP
This option is to specify whether the Wi-Fi WAN will connect to any open mode access
point it finds. By default, this is disabled.
Reply to ICMP
PING
If this field is disabled, the WAN connection will not respond to ICMP PING requests.
By default, this is enabled.

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English