Pepwave MAX User Manual

http://www.pepwave.com
68
Copyright @ 2013 Pepwave
Algorithm
This setting specifies the behavior of Pepwave MAX for the custom rule.
One of the following values can be selected:
 Weighted Balance
 Persistence
 Enforced
 Priority
 Overflow
 Least Used
 Lowest Latency
The upcoming sections present the details of the listed algorithms.
Terminate
Sessions on Link
Recovery
This setting specifies whether to terminate existing IP sessions on a less preferred WAN
connection in the event that a more preferred WAN connection is recovered. This setting
is applicable to the Algorithms: Weighted, Persistence and Priority.
By default, this is disabled. In this case, all existing IP sessions will not be terminated or
affected when any other WAN connection is recovered. If it is set to enabled, existing IP
sessions may be terminated when another WAN connection is recovered such that only
the preferred healthy WAN connection(s) are used at any point in time.
12.2.1 Algorithm: Weighted Balance
This setting specifies the ratio of WAN connection usage to be applied on the specified IP Protocol & Port,
and is applicable only when Algorithm is set to Weighted Balance.
The amount of matching traffic that is distributed to a WAN connection is proportional to the weight of the
WAN connection relative to the total weight. Use the sliders to change the weight for each WAN.
Example: With the following weight settings:
 Ethernet WAN1: 10
 Ethernet WAN2: 10
 Wi-Fi WAN: 10
 Cellular 1: 10
 Cellular 2: 10
 USB: 10

Pepwave MAX Specifications

General

Brand	Pepwave
Model	MAX
Category	Network Router
Language	English