Routing Mode
NAT allows substituting the real address in a packet with a mapped addr
ess that is
routable on the destination network. By clicking the help icon in this field, you can
display the IP Forwarding option, if your network requires it.
Password
Enter the required information in these fields in order to connect via L2TP to your
ISP.
The parameter values are determined by and can be obtained from your ISP.
Confirm L2TP
Password
Verify your password by entering it again in this field.
Address / Host
L2TP server address is a parameter which is provided by your ISP.
Note: Leave this field blank unless it is provided by your ISP.
Address Type
Your ISP will also indicate
whether the server IP address is Dynamic or Static.
Please click the appropriate value.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies
the DNS (Domain Name System) servers to be used when a DNS lookup is rout
through this connection.
Selecting Obtain DNS server address automatically
results in the DNS servers
assigned by the PPPoE server to be used for outbound DNS lookups over the WAN
To Next Page
Loading...
Need help?
General
