Pepwave Peplink MAX Series User Manual

WAN IP Address
/ Subnet Mask /
Default Gateway
These settings allow you to specify the information required in order to communicate
on the Internet via a fixed Internet IP address. The information is typically
determined by and can be obtained from the ISP.
Remote GRE
Host
This field allows you to enter the IP address of the remote GRE.
Tunnel Local IP
Address
This field allows you to enter the IP address of the local tunnel for the GRE tunnel
connection.
Tunnel Remote
IP Address
This field allows you to enter the IP address of the remote tunnel for the GRE tunnel
connection.
DNS Servers
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies
the DNS (Domain Name System) servers to be used when a DNS look
up is routed
through this connection.
Selecting Obtain DNS server address automatically
results in the DNS servers
assigned by the PPPoE server to be used for outbound DNS lookups over the WAN
connection.
(The DNS servers are obtained along with the WAN
IP address assigned from the
PPPoE server.)
When Use the following DNS server address(es)
is selected, you can enter
custom DNS server addresses for this WAN connection into the DNS server 1
and
DNS server 2
fields.

Pepwave Peplink MAX Series Specifications

General

Brand	Pepwave
Model	Peplink MAX Series
Category	Network Router
Language	English