Roaming
Connect to Any
Open Mode AP
This option is to specify whether the Wi-
Fi WAN will connect to any open mode
access points it finds.
Beacon Miss
Counter
This sets the threshold for the number of missed beacons.
Bandwidth Allowance Monitor
Action
If enabled, you will be notified by email when usage hits 75% and 95% of the
monthly allowance.
If Disconnect when usage hits 100% of monthly allowance
is checked, this WAN
connection will be disconnected automatically when the usage hits the monthly
allow
ance. It will not resume connection unless this option has been turned off or
the usage has been reset when a new billing cycle starts.
Start Day
This option allows you to define which day of the month each billing cycle begins.
Allowance
This field is for defining the maximum bandwidth usage allowed for the WAN
connection each month.
Method
This setting specifies the health check method for the WAN connection. This value
can be configured as Disabled, PING, DNS Lookup, or HTTP
. The default method
is DNS Lookup. For mobile Internet connections, the value of Method can be
To Next Page
Loading...
Need help?
General
