Pepwave Peplink MAX Series User Manual

The setting is the same as the Website type (refer to the description in the section above).
Application type content need to be packed as explained below:
1. Implement two bash script files, start.sh and stop.sh in the root folder, to start and stop
your application. The MediaFast router will only execute start.sh and stop.sh when the
corresponding website is enabled and disabled respectively.
2. Compress the application files and the bash script to .tar.gz format.
3. Upload this tar file to the router.

Pepwave Peplink MAX Series Specifications

General

Brand	Pepwave
Model	Peplink MAX Series
Category	Network Router
Language	English