There a
re three main selections for the outbound traffic policy:
● High Application Compatibility
● Normal Application Compatibility
● Custom
Note that some Pepwave routers provide only the Send All Traffic To setting here. See Section 12.1
for details
.
Outbound Policy Settings
High Application
Compatibility
Outbound traffic from a source LAN device is routed through the same WAN
connection regardless of the destination Internet IP address and protocol. This
option provides the highest application compatibility.
Normal
Application
Compatibility
Outbound traff
ic from a source LAN device to the same destination Internet IP
address will be routed through the same WAN connection persistently, regardless
of protocol. This option provides high compatibility to most applications, and users
still benefit from WAN link
load balancing when multiple Internet servers are
accessed.
Custom
Outbound traffic behavior can be managed by defining rules in a custom rule table.
A default rule can be defined for connections that cannot be matched with any of
the rules.
The default policy is Normal Application Compatibility.
Tip
Want to know more about creating outbound rules? Visit our YouTube Channel for a video tutorial!
To Next Page
Loading...
Need help?
General
