Pepwave Peplink MAX Series User Manual

New Custom Rule Settings
Service Name
This setting specifies the name of the outbound traffic rule.
Enable
This setting specifies whether the outbound traffic rule takes effect. When Enable
is checked,
the rule takes effect: traffic is matched and actions are taken by the Pepwave router based
on the other parameters of the rule. When Enable
is unchecked, the rule does not take effect:
the Pepwave router disregards the other parameters of the rule.
Click the drop-down menu next to the checkbox to apply a time schedule to this custom rule.
Source
This setting specifies the source IP Address, IP Network, MAC Address or Grouped Network
for traffic that matches the rule.
Destination
This sett
ing specifies the destination IP address, IP network, Domain name, SpeedFusion
Cloud, PepVPN Profile or Grouped network for traffic that matches the rule.

Pepwave Peplink MAX Series Specifications

General

Brand	Pepwave
Model	Peplink MAX Series
Category	Network Router
Language	English