Pepwave Peplink MAX Series User Manual

LAN
Administration
IP
This setting specifies a LAN IP address to be used for accessing administration
functionality. This address should be unique within the LAN.
Subnet Mask
This setting specifies the subnet mask of the LAN.
Important Note
For Pepwave routers in NAT mode, the virtual IP (VIP) should be set as the default gateway for all hosts
on the LAN segment. For example, a firewall sitting behind the Pepwave router should set its default
gateway as the virtual IP instead of the IP of the master router.
In drop-in mode, no other configuration needs to be set.

Pepwave Peplink MAX Series Specifications

General

Brand	Pepwave
Model	Peplink MAX Series
Category	Network Router
Language	English