Management VLAN
ID
This field specifies the VLAN ID to tag to management traffic, such as AP to AP
controller communication traffic. The value is 0
by default, meaning that no VLAN
tagging will be applied.
Note: change this value with caution as alterations may result in
connection to the AP controller.
Operating
Choose from the schedules that you have defined in System>Schedule
the schedule for the integrated AP to follow from the drop-down menu.
Beacon Rate
A
This drop-down menu provides the opt
ion to send beacons in different transmit
bit rates. The bit rates are
,
,
,
, and
.
Beacon Interval
A
This drop-down menu provides the option to set the time between each beacon
send. Available options are 100ms, 250ms, and 500ms.
DTIM
A
This field provides the option to set the frequency for beacon to include delivery
traffic indication message (DTIM). The interval unit is measured in milliseconds.
RTS Threshold
A
This field provides the option to set the minimum packet size for the unit to send
an RTS using the RTS/CTS handshake. Setting
disables this feature.
Fragmentation
A
Determines the ma
ximum size (in bytes) that each packet fragment will be broken
down into. Set 0 to disable fragmentation.
A
Select the distance you want your Wi-
Fi to cover in order to adjust the below
parameters. Default values are recommended.
Slot Time
A
This field provides the option to modify the unit wait time before it transmits. The
default value is 9μs.
ACK Timeout
A
This field provides the option to set the wait time to receive acknowledgement
packet before doing retransmission. The default value is 48μs.
Frame
A
With this feature enabled, throughput will be increased by sending two or more
data frames in a single transmission.
Frame Length
This field is only available when Frame Aggregation
is enabled. It specifies the
frame length for frame aggregation. By default, it is set to
.
Web Administration Settings
To Next Page
Loading...
Need help?
General
