How to check if a Pepwave Cellular Router supports
Remote SIM
1. Go to Network (Top tab), then WAN (Left-side tab), and click Details on any cellular WAN.
This will open the WAN Connection Settings page.
2. Scroll down to Cellular settings.
If you can see the Remote SIM Settings section, then the cellular router supports Remote
SIMs.
Monitor the status of the Remote SIM
1. Go to Network (Top tab), then WAN (Left-side tab), and click Details on the cellular WAN
which was configured to use RemoteSIM.
2. Check the WAN Connection Status section. Within the cell WAN details, there is a section
for Remote SIM (SIM card IMSI, SIM Injector serial number and SIM slot).
To Next Page
Loading...
Need help?
General
