Pepwave Peplink MAX Series User Manual

After successful login, the Dashboard of the web admin interface will be displayed.
The Dashboard shows current WAN, LAN, and Wi-Fi AP statuses. Here, you can change WAN
connection priority and switch on/off the Wi-Fi AP. For further information on setting up these
connections, please refer to Sections 8 and 9.
Device Information displays details about the device, including model name, firmware version,
and uptime. For further information, please refer to Section 22.
Important Note
Configuration changes (e.g. WAN, LAN, admin settings, etc.) will take effect only after clicking the Save
button at the bottom of each page. The Apply Changes button causes the changes to be saved and
applied.

Pepwave Peplink MAX Series Specifications

General

Brand	Pepwave
Model	Peplink MAX Series
Category	Network Router
Language	English