Need help?Do you have a question about the PerkinElmer Frontier FT-NIR and is the answer not in the manual?
General| Power Requirements | 100-240 VAC, 50/60 Hz |
|---|---|
| Detector Type | InGaAs |
| Data Acquisition Rate | Up to 70 spectra/second |
| Interface | Ethernet |
| Beam Splitter | CaF2 |
| Detector | TE-cooled InGaAs |
| Signal-to-Noise Ratio | 50, 000:1 |
| Data Collection Rate | Up to 70 spectra/second |
| Operating Temperature Range | 15-30 °C |
| Relative Humidity | 20-80% non-condensing |
Provides a brief overview of safety precautions for routine use of the spectrometers.
Details general safety requirements, environmental conditions, and hazard warnings for the instrument.
Outlines safety precautions when working with flammable materials near the instrument.
Details electrical safety requirements, grounding, and precautions for handling the instrument.
Explains laser safety classifications and regulations applicable to the instrument's laser components.
Illustrates and explains various warning signs found on the instrument indicating potential hazards.
Provides instructions for safely unpacking the spectrometer and checking its contents.
Provides step-by-step instructions for establishing a PC connection using the crossover cable.
Details how to connect the instrument to the main electrical supply, including wiring color codes.
Guides the user through installing the instrument's software and drivers.
Provides steps to launch and log into the Spectrum software application.
Details the procedure for acquiring spectra from samples using the software.
Guides the user through changing the desiccant packs to maintain instrument performance.
Explains the procedure for cooling the MCT detector using liquid nitrogen.
Details the procedure and safety precautions for opening the main cover of the spectrometer.
Provides instructions for replacing the instrument's IR source lamp.
Guides the user through the process of replacing the beamsplitter component.
Provides instructions for replacing the laser module and its power supply.
To Next Page