52 . Frontier IR Single-range Spectrometers User's Guide
Quality Checks
Quality Checks can be selected in the Setup Instrument Advanced tab (Figure 18).
What are Quality Checks?
Quality checking is a tool for less experienced IR users that identifies possible problems in
the spectrum being collected and suggests ways of improving the measurement.
What do Quality Checks do?
Simply select the Quality Checks that you want to perform from the list in the Setup
Instrument Advanced tab and, if required, adjust the threshold range using the slider bars.
To display more information about an individual test, double-click on its name in the list.
When you collect your spectrum, the selected tests are performed as the data is collected
and a signal light (green , amber , or red ) indicates the result.
The results from the Quality Checks imply:
Okay ( ) – the quality of the spectra is satisfactory.
Caution ( ) – the software has identified a problem that you may want to investigate in
order to improve the quality of the spectra you are collecting.
Warning ( ) – the software has identified a serious problem that you should attempt to
cure before collecting further spectra.
To Next Page
Loading...
