42 . Frontier IR Single-range Spectrometers User's Guide
Installing the Instrument in the Software
Before you can use the instrument it must be set up in the software.
Installing the software
NOTE: If you are supplying your own computer, make sure that it meets the minimum
requirements for hardware and software set out in the “PC Requirements” section of
the
Administrator’s Guide
for your software
,
which can be found on the
IR & Raman
Manuals CD
(part number L1050002) supplied with your instrument.
To install Spectrum software, insert the supplied DVD and follow the instructions on the
screen. Details of the installation program are given in the
Administrator’s Guide
.
The Instrument Install Wizard
After installing your software you will need to install your instrument.
If you have Spectrum software or Spectrum ES software, select Add Instrument from
the Administration group on the Setup menu.
The Instrument Install Wizard starts.
OR
If you have AssureID software, select Configure Instruments from the Configure
Instruments and Accessories group on the Tools menu.
The Instrument Install Wizard starts.
Details of the Instrument Install Wizard can be found in the
Administrator’s Guide
for your
software, which can be found on the
IR & Raman Manuals CD
(part number L1050002)
supplied with your instrument.
To Next Page
Loading...
