Warnings and Safety Information . 19
Labels
When this label is attached to an instrument it means ‘Caution, risk of
danger’. Refer to the manual to find out the nature of the potential
hazard and any actions that have to be taken.
The product identification label is on the front of the instrument. Other labels are fixed to the
Frontier IR spectrometers in the locations shown in Figure 1 and Figure 2:
Figure 1 Labels (rear of instrument)
NOTE: The label with a crossed-out wheeled bin symbol and a rectangular bar indicates that
the product is covered by the Waste Electrical and Electronic Equipment (WEEE)
Directive.
Refer to Appendix 5: WEEE Instructions for PerkinElmer Products
on
page 96.
To Next Page
Loading...
