2-4
2. Machine Assistant
1. Winding from the second spool pin
Swing the second spool pin (20) up and lock. Place a spool
of thread with an appropriate spool cap on the spool pin.
Threading
Place the thread into thread guide (A) from front to back
and pull it counter clockwise above the bobbin winder
thread guide (B). Wind the start of the thread around the
bobbin several times in a clockwise direction.
Start bobbin winding by pushing the bobbin lever to the
right. As soon as the bobbin is full, the winding action will
be stopped automatically. Cut the thread and remove the
bobbin from the winder
2. Winding from the third spool pin
Insert the third spool pin in the hole (21) provided. Place a
spool of thread with an appropriate spool cap on the spool
pin.
1.
2.
A
B
To Next Page
Loading...
Need help?
General
