1-31. Overview
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Stitch overview creative 2144
For all straight stitch and topstitching jobs, stitch length can be increased up to
6 mm. 19 needle positions are available, for edge finishing or sewing in zippers.
For all straight stitch and topstitching jobs, particularly on stretch fabrics, e.g.
trouser seams, sportswear and work wear. Stitch length can be increased up
to 6 mm for decorative stitching.
For finishing seams, overcasting, appliqué work, inserting lace etc.
For sewing on elastic, darning tears and applying patches.
A durable reverse straight stitch. Suitable for stitch combinations in stitch se-
quences.
For decorative hems particularly on stretch fabrics, e.g. underwear.
For sewing on elastic thread, overstitching terry cloth seams and for ornamen-
tal hem seams (smocking effect).
For sewing on elastic, darning tears and applying patches.
For inserting elastic tape in sportswear and bathing suits. (Extremely durable
seam for open-knit materials).
Particularly suitable for appliqué work thanks to its stitch density.
For joining foundation garments. Provides a decorative hemstitching effect.
For overstitching elastic cords and wool threads as well as for gathering and
smocking.
Provides a highly elastic, decorative seam for hem finishing on sportswear and
casuals.
For sewing elastic tape on sportswear and bathing suits. Also suitable for hem
finishing.
For quilt projects.
For decorative embellishments and topstitching quilt projects.
For decorative embellishments and topstitching quilt projects.
Straight stitch with 19
needle positions
Stretch triple straight
stitch with 19 needle
positions
Zigzag stitch
Elastic stitch with
two perforations
Reverse straight stitch
Shell-edging stitch
Honeycomb stitch
Elastic stitch with one
perforation
Stretch triple elastic
stitch
Purl stitch
Bridging stitch
Decorative
elastic stitch
Cross-hem stitch
Stretch triple
zigzag stitch
Quilt stitch with
13 needle positions
Quilt stitch
Quilt stitch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Prog Description Application Width up
No. to mm
–
–
9
7
–
6
7
7
6
6
7
6
7
6
–
9
4,5
To Next Page
Loading...
Need help?
General
