4-6
4. Operate the multi-color touch screen
Finishing the buttonhole by manual setting
You can determine the length of the reverse buttonhole
seam yourself by using the
icon. Use this method for
any buttonhole.
Screen when setting the length with
.
Screen when setting the length with
.
Touch
anytime before or during sewing the buttonhole.
Add the second bartack at the end of the reverse seam by
pressing the reverse button.
How to correct the buttonhole
Correct the buttonhole balance by touching .
The number of stitches is increased or reduced according
to the correction value that you have entered. The correc-
tion value is expressed by percentage.
Sew a sample buttonhole. Use the +/- icons to recreate
your sample on the multi-color touch screen. The button-
hole is then adjusted automatically according to the correc-
tion value.
By using the Sensormatic guide you will obtain uniform
looking buttonhole seams.
Touch
to return to the selection menu for selecting a
new stitch.
Touch
to return to the main menu.
Tip: To find more information about buttonholes,
please advise your Creative Assistant and/or pages
5-9 – 5-11.
To Next Page
Loading...
Need help?
General
