Pfaff 2144 User Manual

4-2
4. Operate the multi-color touch screen
The width of the zigzag starts at 0 mm, and becomes
wider until the previously selected stitch width is reached. If
you press the reverse key, the width is automatically redu-
ced to 0 mm.
The width of the zigzag stitch tapers to 0 mm and
stops. For mitered corners, pivot your fabric and continue
stitching. The stitch will automatically become wider as you
sew.
The stitch width is reduced to 0 mm at an angle of 30°.
The stitch width is reduced to 0 mm at an angle of 45°.
Save your change by touching
, the window is then
closed.
Touch
, the window is closed without any changes
being saved.
Touch
to return to the main menu.
For a symmetrical stitch layout at 90° and 60° angles, tape-
ring is available for the following stitch patterns.
• 4,6,9,12,14,33,34,41,42,112,130,133,137,139,
141,169,177,194.
Unlike the no. 3 and 10 zigzag stitches, the stitches are not
automatically adjusted to 0.35/0.4 mm stitch length and
7mmstitchwidth.
Altering stitch settings
Stitch width
You can change the stitch width with the +/- icons.
Stitch length
You can change the stitch length with the +/- icons
from 0,2 mm to 6 mm.
We have preset the length to 6 mm. This is the maxi-
mum value possible. If you have selected this value,
the function is automatically shown as inactive.
The stitch length is reduced in small steps and has a
minimum value of 0.2 mm.
Thread tension
You can change the thread tension as needed for
speciality techniques.
We have increased the tension to 4.
If you have selected the maximum value, the function
is automatically shown as inactive.
The stitch settings will not be changed permanently. The
next time the stitch is opened, the stitch length will auto-
matically be restored to 1.5 mm, the stitch width to 4.0 mm
and the tension is set to a value of 4.0.
If you open the context menu
, you have the possibi-
lity to permanently save the changes for the zigzag stitch.
Setting sewing functions and programs
You can alter settings and sewing functions of the zigzag
stitch. Simply touch
for the different choices.
Example: Tapering
Tapering is a technique where the width of the zigzag stitch
is altered during sewing. Your Pfaff creative 2144 allows
you to select different effects or angles which are sewn
automatically.
Zigzag stitch No 3 and Purl stitch No 10 in menu “Join”
taper from the center needle position.
Touch
icon.

Pfaff 2144 Specifications

General

Brand	Pfaff
Model	2144
Category	Sewing Machine
Language	English