Function buttons
These buttons are located above the needle.
If you press the “Needle up/down” or “Sew slow” button the button will light up. If the function cannot be used at that
point, the button remains dark.
Thread cutter: If you press this button, you automatically cut the needle thread and bobbin thread.
Pattern start: If you press this button, the machine automatically returns to the beginning of a stitch/pattern or a
sequence that has already been started.
Sew slow: If you press this button, the machine sews at half of the highest speed.
Needle up/ needle down: If you press this button, the needle automatically comes to stop in the lower position
when you stop sewing.
You can simultaneously determine whether and how far the presser foot is raised when you take your foot off the
foot control. A window is opened for this purpose. You can choose between “0” , “low” = 3 mm, “medium” = 6 mm
and “high” = 9 mm.
When you press the foot control, the presser foot is automatically lowered. This allows you to pivot the fabric
beneath the foot without the fabric slipping. The pre-set value is “0”. The lifting height of the presser foot can be
permanently adjusted, see “The “context” Machine Settings menu”, page 3-19.
Reverse sewing button: This button has several functions
1. If you press this button while sewing, the machine sews in reverse for as long as you keep the button pressed.
2. If you press this button before starting to sew, the machine sews in reverse until you press the button again.
When the function is activated, a reverse sewing arrow appears on the multi-color touch screen.
3. If you have activated the tie-off program, tie-off at the end is initiated via this button.
4. In the ”Patchwork”, ”Tapering”, “Four sewing directions” and ”Darning” programs, you determine the length of the
seams with this button.
5. If you are programming the length of a buttonhole, you determine the length of the buttonhole seam with this but-
ton.
Your Pfaff creative 2144 is operated by touching the appropriate icon on the multi-
color touch screen.
Some screens contain arrows that allow you to scroll forward and back through mul-
tiple pages.
Sewing functions for the machine can be individually altered.
Touch
to close the window, save your altered settings and be able to select a
new function.
Touch
, to continue without saving any settings.
General notes on use of the machine
Each open window can be repositioned on the screen. Just touch the colored bar with your finger and drag.
We have enclosed pages (chapter 1) with a full set of explanations and the commands available in the menus for
each icon.
Please keep these handy reference sheets available for reference when using the machine.
To Next Page
Loading...
Need help?
General
