4-134. Operate the multi-color touch screen
• Touch any design, and it appears enlarged on the
screen.
Confirm your choice with
or touch the screen.
Your Pfaff creative 2144 calibrates, to sense the size of the
hoop attached to the embroidery unit. This might take a
few seconds. After the calibration, your Pfaff creative 2144
is ready to embroider.
If no hoop is attached, your Pfaff creative 2144 selects the
hoop size most suitable for your design.
All settings and sewing functions for the design are dis-
played on the screen and can be altered.
Basting in the embroidery hoop
If you touch the icon, you activate a basting function.
The machine will then sew a 6 mm straight stitch at a
distance of 2 mm around one or more selected designs.
This enables you to secure your fabric to a non-adhesive
stabilizer placed beneath it, especially when the fabric to
be embroidered cannot be hooped. It also provides sup-
port for stretchy fabrics.
Tip: If you select “embroidery / single color segments”,
only the selected color segment will be basted.
If you press the foot control, the embroidery foot is lowered
into the embroidery position and the sewing machine starts
to baste.
Enlarged view
If you touch the icon, an enlarged representation
which covers the whole multi-color touch screen is opened.
By touching the multi-color touch screen you close that
view.
To Next Page
Loading...
