Pfaff 2144 User Manual

3-19
3. Getting started with your Pfaff creative 2144
Audio signal
Different audio signals can be heard when you touch icons
or when screen messages appear. You can select your per-
sonal audio signals.
• Toturnthesignalson,touchtheiconwiththedesired
audio signal (this becomes active and selected) and
touch
to confirm.
• Touchyourselectedaudiosignaliconagaintoturnoff
the signal (it becomes active).
• Orselectadifferentsignal(thebuttonbecomesactive
and selected).
Touch
to confirm your selection and close the win-
dow.
Creative Memory Card
In this menu, you can format a creative memory card or
change the name on a card.
Touch the appropriate card drive icon.
A window opens where you can choose between two opti-
ons: “Change name” and “Format”. Touch to select.
• Ifyoutouch“Changename”,aeldopenswhereyou
can enter a new name. The name can have a maximum
length of 20 characters.
Touch
to confirm your selection.
• Ifyoutouch“Format”asafetyquestionappear:
The card is not empty!
Will you really format? (all data will be deleted)
Touch
to delete all information from the creative
memory card.
Back to basic settings
• Thisfunctionallowsyoutoresetallmachinesettings
that you have previously changed, such as the stitch
settings or sewing functions, to the default settings.
• Youcanreactivatetheinformationtexts.Alltextsare
then shown automatically.
Touch
to confirm.
Setting the bobbin winding speed
You can select the speed at which the bobbin is wound
when the machine is stopped.
You can choose between 3 different speeds, “low”, “medi-
um” and “high”.
If you touch the “Show dialogue” icon, a window for selec-
ting the speed opens each time the bobbin winder is swit-
ched on.
The selected speed can be halved at any time by touching
the
icon.
Note: If you wind the bobbin while the sewing machine is
running, the winding speed is automatically set at “low”.
Needle Up /Down
– raising the presser foot
You can determine how high the presser foot should raise
automatically by touching the
icon.
If you touch “0”, “low”, “medium” or “high”, the presser
foot is raised automatically to the selected position, when
you take your foot off the foot control.
The window for setting the presser foot height will not be
opened.
If, in addition, you touch the “Show dialogue” icon, the
window for setting the presser foot height will always open
when you touch the
icon.
The selected presser foot height will always be retained as
a new presetting.
The sewing machine is ready to sew immediately.

Pfaff 2144 Specifications

General

Brand	Pfaff
Model	2144
Category	Sewing Machine
Language	English