Chapter 1: Introducing the PEC Plus Phason
8 2009-06-15
Entering a PIN
If security is enabled, users must enter the PIN (personal identification number) before they can
access the control’s functions. After entering a PIN, the control will not ask again until five minutes
have passed since the last key press. For more information, read Using PIN security on page 66.
When you are required to enter a PIN, the display shows
To enter a PIN
When prompted, enter the four-digit PIN using the parameter buttons.
The display does not show the PIN as you enter it.
If you enter the PIN incorrectly, the display shows fail.
pin
To Next Page
Loading...
