31040003 41
Chapter 4: Programming the PEC Plus
Chapter 4 discusses how to program your PEC Plus with the settings it uses to control your
equipment.
Topics in chapter 4 include:
What you need to know before programming your PEC Plus below
Programming target temperatures on page 42
Programming the stages on page 46
What you need to know before programming
your PEC Plus
Programming your PEC Plus basically means telling the equipment what you want it to do and when
you want it done. For example, for a single-speed fan set for cooling, you might say: “Switch on
when the temperature reaches 80°F.”
Programming checklist
Because some settings must be programmed before others, we recommend programming your PEC
Plus in the following order. If you do not have elements of a particular type, skip that step. For
example, if you do not have curtains, skip that step.
Programming target temperatures
Programming the group set point
Programming the growth curve
Programming the stages
Programming variable stages
Programming actuators
Programming curtain control relays
Programming heating and cooling elements and duty cycles
Programming alarm settings
To Next Page
Loading...