31040003 61
Chapter 5: Monitoring and maintaining your PEC
Plus
Chapter 5 explains how to monitor the PEC Plus after you have installed, configured, and
programmed it. Topics in chapter 5 include:
Monitoring your PEC Plus below
Testing settings and equipment on page 63
Using PIN security on page 66
Servicing and maintaining your PEC Plus on page 67
Monitoring your PEC Plus
Your PEC Plus displays temperature, alarm, and status information. Monitoring the control regularly
gives you a better idea of what is going on in your facility.
When in normal operation, the display shows the ambient temperature.
The displayed temperature is the average from all probes connected. If
probe 4 is configured for outdoor temperature monitoring, its
temperature is not included in the average.
For more information about probe configuration and temperature averaging, read Configuring
temperature probes
on page 31.
Displaying individual probe temperatures
The main display shows the average temperate of all probes that are connected and configured,
except for outdoor probes. You can display the current temperature for any individual probe by
pressing its corresponding number key. For example, to display the temperature for probe 4, press 4.
If an indoor probe is damaged or missing, the display shows pbad.
If an outdoor probe is damaged or missing, the display shows ---.
If a probe is not configured, the display shows poff.
756
To Next Page
Loading...