i
How to use this manual
This section is a ‘quick-reference guide’ of the manual. You can look at the chart on the next page to
help you find what you are looking for. If you are not sure where to find something specific, look in
the Table of contents at the front of the manual or the Index on page 96.
Below are some helpful suggestions.
If you have not installed and configured your PEC Plus, read Chapter 2: Installing your PEC
Plus
on page 9 and Chapter 3: Configuring your PEC Plus on page 27.
If you are ready to install, configure, or program your PEC Plus, use the worksheets starting in
Appendix D on page 84.
If you are not sure how to use the keypad or how to read the display and menus, read Becoming
familiar with the PEC Plus
on page 5.
If you need to program your PEC Plus or adjust settings (set points, growth curves, fan speeds,
etc.), read Chapter 4: Programming the PEC Plus on page 41.
If you have an alarm condition or warning displayed and are not sure what it means, look at
Appendix B: Troubleshooting on page 77.
If you are not sure of the meaning of a term, look it up in the Glossary on page 73.
To Next Page
Loading...
