Philips Avalon FM20 - Bottom Cover Disassembly;Reassembly; Removing the Power Supply Assembly

10 Repair and Disassembly
183
Bottom Cover Disassembly/Reassembly
This section describes disassembly and reassembly operations for the bottom cover and its assemblies.
Removing the Power Supply Assembly
1 Remove the top cover assembly (see “Removing the Top Cover Assembly” on page 141).
2 Disconnect the power supply cable connector from the main CPU board. While removing the
connector, support the end of the main CPU board to prevent excessive flexing.
3 Remove the three screws securing the power supply