3 Installation Instructions
37
Configuring the Equipment Label
OB TraceVue/IntelliSpace Perinatal requires a unique equipment label. In OB TraceVue/IntelliSpace
Perinatal it is possible to prevent connection to monitors with specific equipment labels by the means
of a filtering mechanism. For more details, see the OB TraceVue/IntelliSpace Perinatal Instructions
for Use.
1 Select the Bed Label screen element to call up the Bed Info menu.
2 Select Equipment Label to call up the on-screen keyboard.
3 Enter the system identifier.
Configuring SmartKeys
Check that the configured SmartKeys are suitable. Configure the SmartKeys preferred by the
institution from a global list of Global Smart Keys. The global list of SmartKeys is stored as a unique
monitor setting in the monitor configuration. See the section Configuring Global SmartKeys in the
Configuration Guide for details on how to configure the global SmartKey list.
USB/PS/2 Keyboard/Mouse
1 Switch off the monitor before connecting any USB/PS/2 compatible device.
2 Connect the USB/PS/2 connector to the USB/PS/2 Interface board in the monitor at the slot
indicated by the appropriate symbol.
3 The default keyboard language setting for all initial configurations is "US".
4 To configure the keyboard language manually, go to Service Mode, select Main Setup, Hardware,
Keyboard and then select the proper language. Please note that this setting does not clone.
To Next Page
Loading...
