Philips HDR3500 User Manual

English
14
Remote Control (continued)
Using the remote control
1
3
2
A
Open the battery compartment.
B
Insert two batteries of type R03 or AAA,
following the indications (+-) inside
the compartment.
C
Close the cover.
D
Point the remote control directly at the
remote sensor (iR) on the front panel
and select the desired function.
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Do not mix batteries (old and new
or carbon and alkaline, etc).
– Batteries contain chemical
substances, so they should be
disposed of properly.
HDR3500_05_eng_30381.indd 14HDR3500_05_eng_30381.indd 14 2008-02-27 10:51:36 AM2008-02-27 10:51:36 AM

Philips HDR3500 Specifications

Picture and Display

D/A converter	10 bit, 54MHz
A/D converter	10 bit, 54 MHz
Picture enhancement	Progressive scan

Sound

D/A converter	24 bit, 96 kHz
A/D converter	24 bit, 96 kHz

Video Recording

Recording Media	DVD+R/+RW, DVD-R/-RW, DVD+R DL, HDD
Recording system	PAL
Compression formats	MPEG2

Storage Media

Hard Disk Capacity	160 GB
HDD recording enhancements	Time Shift Buffer, Instant Replay, Pause Live TV
HDD video recording capacity	180 hr

Connectivity

Front / Side connections	Audio L/R in, CVBS in, i.LINK DV in (IEEE1394, 4-pin), USB 1.1
Rear Connections	SCART1 (CVBS, RGB out), RF antenna in / TV out, Analog audio Left/Right out, Composite video (CVBS) output, S-Video out, Component Video output, Digital coaxial out, SCART2 (CVBS in)

Power

Power supply	220-240V, 50Hz
Power consumption	30 W
Standby power consumption	2.4 W

Weight and Dimensions

Packaging dimensions	561x120x413mm
Product dimensions	435x325x43mm
Product weight	3.5 kg
Weight incl. Packaging	5.2 kg