Philips HDR3500 User Manual

English
62
Setup Menu Options (continued)
{ Video } settings (underlined options are the factory default settings)
Video Output
Select the type of video output that matches the video
connection between this recorder and your TV.
{ SCART RGB } – For SCART connection.
{ YUV Interlace } – For component video connection.
{ YUV P-Scan } – For component video connection to
progressive scan TV. (Use your TV
remote control to switch to the correct
viewing channel. Refer to your TV’s user
manual on how to select the correct video
input on your TV).
Note: Video output setting is not required for S-Video or Composite
(CVBS) video connection.
HDR3500_05_eng_30381.indd 62HDR3500_05_eng_30381.indd 62 2008-02-27 10:51:46 AM2008-02-27 10:51:46 AM

Philips HDR3500 Specifications

Picture and Display

D/A converter	10 bit, 54MHz
A/D converter	10 bit, 54 MHz
Picture enhancement	Progressive scan

Sound

D/A converter	24 bit, 96 kHz
A/D converter	24 bit, 96 kHz

Video Recording

Recording Media	DVD+R/+RW, DVD-R/-RW, DVD+R DL, HDD
Recording system	PAL
Compression formats	MPEG2

Storage Media

Hard Disk Capacity	160 GB
HDD recording enhancements	Time Shift Buffer, Instant Replay, Pause Live TV
HDD video recording capacity	180 hr

Connectivity

Front / Side connections	Audio L/R in, CVBS in, i.LINK DV in (IEEE1394, 4-pin), USB 1.1
Rear Connections	SCART1 (CVBS, RGB out), RF antenna in / TV out, Analog audio Left/Right out, Composite video (CVBS) output, S-Video out, Component Video output, Digital coaxial out, SCART2 (CVBS in)

Power

Power supply	220-240V, 50Hz
Power consumption	30 W
Standby power consumption	2.4 W

Weight and Dimensions

Packaging dimensions	561x120x413mm
Product dimensions	435x325x43mm
Product weight	3.5 kg
Weight incl. Packaging	5.2 kg