English
23
Step 3: Installation and Setup
The installation setup appears the rst
time you turn on this recorder. The
settings help you to set up basic recorder
features, including TV programme
installation, language and system clock
settings.
Before you start ...
Complete the initial installation before
you start playback or recording.
A
Turn on the TV.
B
Press STANDBY-ON 1 on the
recorder to turn it on.
Your TV should display the installation
screen - { Welcome } screen.
Otherwise, you may need to select
the correct TV input channel. (See the
TV user manual to select the correct
input on your TV).
Welcome
OK
Next Page
Before using the recorder,
please complete the installation.
C
Press OK on the remote control to
continue.
The menu language options appears.
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown in the user manual.
Menu Language
Select a menu language.
English
Français
Deutsch
Español
OK
BACK
Next Page Prev Page
D
Select the language for this recorder’s
on-screen display and press OK.
The country setting menu appears.
Country Setting
OK
BACK
Next Page Prev Page
Select your current country.
UK
Germany
France
Spain
E
Select the country of your area for auto
channel tuning and press OK.
The auto scan menu appears.
Cancel
Auto scan the channels.
Channels found: 10
Auto Scan
100%
OK
BACK
Next Page Prev Page
Note: Make sure you have successfully
made all the required connections to the
recorder, the TV and Satellite Receiver/
Cable Box (if any) and turned them on.
HDR3500_05_eng_30381.indd 23HDR3500_05_eng_30381.indd 23 2008-02-27 10:51:38 AM2008-02-27 10:51:38 AM
To Next Page
Loading...
Need help?
Picture and Display
Power
Weight and Dimensions
