Phoenix Contact FL MGUARD RS4000 User Manual

FL MGUARD RS4000/RS2000
22
PHOENIX CONTACT 105656_en_05
1.5 Configuration in Stealth mode
On initial startup, the device can be accessed via two addresses:
– https://192.168.1.1/ (see Page 23)
– https://1.1.1.1/ (see Page 23)
Alternatively, an IP address can be assigned via BootP (see “Assigning the IP address via
BootP” on page 24).
The device can be accessed via https://192.168.1.1/ if the external network interface is not
connected on startup.
Computers can access the device via https://1.1.1.1/ if they are directly or indirectly con-
nected to the LAN port of the device. For this purpose, the device with LAN port and WAN
port must be integrated in an operational network in which the default gateway can be ac-
cessed via the WAN port.
– After access via IP address 192.168.1.1 and successful login, IP address
192.168.1.1 is set as a fixed management IP address.
– After access via IP address 1.1.1.1 or after IP address assignment via BootP, the
product can no longer be accessed via IP address 192.168.1.1.

Phoenix Contact FL MGUARD RS4000 Specifications

General

Brand	Phoenix Contact
Model	FL MGUARD RS4000
Category	Network Router
Language	English