FL MGUARD CENTERPORT
105656_en_05 PHOENIX CONTACT 231
11.2 Startup
11.2.1 Safety notes
Personnel Installation, startup and maintenance of the product may only be performed by qualified
specialist personnel who have been authorized for this by the operator. Specialist personnel
must have read and understood the instructions in this manual and act accordingly.
General notes regarding usage
11.2.2 Checking the scope of supply
Before startup, check the scope of supply to ensure nothing is missing.
The scope of supply includes:
–FLMGUARDCENTERPORT
– Package slip
– 2 x AC mains connecting cables
– 19'' server rails/telescopic rails (2 x short, 2 x long)
– Screw set
– Installation instructions for 19'' frame/industrial cabinet (Quickrails installation instruc-
tions)
NOTE: Risk of material damage due to incorrect wiring
Only connect the device network ports to LAN installations. Some telecommunications
connections also use RJ45 sockets; these must not be connected to the RJ45 sockets of
the device.
NOTE: Select suitable ambient conditions
– Ambient temperature:
0°C ... +45°C
– Maximum humidity, non-condensing:
20% ... 90%
To avoid overheating, do not expose the device to direct sunlight or other heat sources.
NOTE: Risk of material damage caused by cleaning agents
Clean the device housing with a soft cloth. Do not use aggressive solvents.
To Next Page
Loading...
Need help?
General
