Phoenix Contact FL MGUARD RS4000 User Manual

FL MGUARD RS4000/RS2000
30
PHOENIX CONTACT 105656_en_05
The configuration profile named "Recovery DATE" subsequently appears in the list of con-
figuration profiles and can be edited and restored with or without changes.
Action • Slowly press the Reset button six times.
After approximately 2 seconds, the STAT LED lights up green.
• Press the Reset button slowly again six times.
If successful, the STAT LED lights up green.
If unsuccessful, the ERR LED lights up red.
If successful, the device restarts after two seconds and switches to Stealth mode. The de-
vice can then be reached again under the corresponding addresses.
mGuard firmware version 8.4.0 or later
• After the recovery procedure has finished, log in to the web interface of the device.
• Open the menu Management >> Configuration Profiles.
• Choose the configuration profile, generated during the recovery procedure: „Recov-
ery-DATE“ (e.g. “Recovery-2016.12.01-18:02:50).
• Click on the Icon „Edit profile“ to analyze the configuration profile and to restore it
with or without changes.
• Click on the Icon „Save“ to apply the changes.

Phoenix Contact FL MGUARD RS4000 Specifications

General

Brand	Phoenix Contact
Model	FL MGUARD RS4000
Category	Network Router
Language	English