24 PianoDisc Installation Guide
228CFX - PianoCD - iQ
Step 14: Leg alterations for placement of rail
cover
NOTE: Some piano manufactures designate the legs for particular locations.
Check for numbers or letters on the legs before proceeding.
A. Place the front legs (bass and treble locations) on the piano.
B. Place a mark on the legs where the rail cover intersects.
• Allow 1/8” (3 mm) clearance between the leg and rail cover. For pianos with an
interlock leg, such as Young Chang, an extra 3/8” (9.5 mm) must be removed for
access.
C. Mark the cutout on the top of the legs. Cut the legs with a jig saw.
• File or sand the area of the leg cut. Stain or paint exposed area to match the
finish of the piano. (See Fig.12)
Figure 12
To Next Page
Loading...
