78 PianoDisc Installation Guide
228CFX - PianoCD - iQ
Clear System Settings
EXIT A MODE WITHOUT SAVING CHANGES. At any time while adjusting
sync values (Sync mode), balancing iQ and media player volume levels (Level
mode) or learning the piano (Learn mode), you may exit the adjustment mode
without saving changes. For example:
• Exiting the Sync mode to discard changes to sync values causes the iQ system to
use previously saved sync values.
• Exiting the Level mode to discard volume level matching between iQ and a media
player causes the iQ system to use previously saved volume level match settings.
• Exiting the Learn mode to discard changes made to the Learn table causes the iQ
system to use previously saved Learn table values.
NOTE: Exiting the Pedal Adjust mode does not discard changes made to pedal settings.
Attempting to use the Reset button to discard changes to pedal settings may interfere
with the proper operation of the piano’s pedal functions.
To exit a mode without saving changes:
1. Use a sharp tipped device to push and release the Reset button.
• Sync, Level and Learn LEDs light only briefly to indicate that you’re exiting the mode
and discarding any changes made to the mode settings.
• Afterwards, the Status LED comes on to indicate normal operation.
To Next Page
Loading...
