PianoDisc 228CFX - Page 79

PianoDisc Installation Guide 79
. . . . .
RESTORE A SYSTEM SETTING TO FACTORY DEFAULT VALUES. The iQ
system gives you the option of restoring an individual system setting (Sync,
Level or Learn) to its factory default values, while retaining changes made to
other system settings.
To restore a system setting to its factory default values:
1. Enter the adjust mode of the system setting you want to restore.
2. Use a sharp tipped device to press and hold the Reset button until the LED lights blink.
3. Release the button and the Status LED is illuminated to indicate normal operation and
restoration of default values.
• If in Sync Adjust mode, all saved sync values are cleared. This enables the iQ system
to restore factory default sync values.
• If in Level Adjust mode, the volume level matching between iQ and a media player is
cleared. This enables the iQ system to restore it’s internal volume to factory default
levels.
• If in Learn mode, all Learn table values are cleared. This enables the iQ system to
restore Learn table values to factory default values.