POWER SUPPLY FAILURE
Description Display message
The power supply may fail during stove operation. It is necessary to distinguish between:
1) power failure during START PHASE I or START PHASE II;
2) power failure without chrono settings;
3) power failure with chrono settings.
Power failure during START PHASE I or START PHASE II.
When power is restored, the appliance is reactivated and the shut down procedure begins.
The message POWER FAILURE appears on the display followed by the message EMPTY BRAZIER.
- If the message POWER FAILURE appears on the display and the appliance is switched off using
button ON/OFF, the message WAIT COOLING appears followed by EMPTY BRAZIER.
- See the table “EMPTY BRAZIER”.
POWER
FAILURE
12:0022
.
c
1
Power failure during operation WITHOUT CHRONO SETTING.
1) The power failure lasts for less than 30 seconds: the appliance continues to function as normal
when power is restored.
2) The power failure lasts for more than 30 seconds: the shut down procedure begins.
The message POWER FAILURE appears on the display followed by the message EMPTY BRAZIER.
- If the message POWER FAILURE appears on the display and the appliance is switched off using
button ON/OFF, the message WAIT COOLING appears followed by the message EMPTY BRAZIER.
- To restart the appliance, see the section “START-UP AND NORMAL OPERATION”.
Power failure during operation WITH CHRONO SETTINGS.
If the power failure lasts for less than 30 seconds:
1) Around the start time: the appliance does not re-start when power is restored.
2) Around the stop time: the appliance continues to function as normal when power is restored.
3) During programmed operation time slot: the appliance continues to function as normal when
power is restored.
If the power failure lasts for more than 30 seconds:
1) Around the start time: the appliance does not re-start when power is restored.
2) Around the stop time: the appliance turns off when power is restored.
3) During programmed operation time slot: the appliance turns off when power is restored.
In cases 1) and 2) described above, the message POWER FAILURE appears on the display followed
by the message EMPTY BRAZIER.
- If the message POWER FAILURE appears on the display and the appliance is switched off using
button ON/OFF, the message WAIT COOLING appears followed by the message EMPTY BRAZIER.
- To restart the appliance, see the section “START-UP AND NORMAL OPERATION”.
SERVICE
Description Display message
Upon reaching 200 hours of stove use and with stove off the display shows the message "SERVICE"
alternated with "OFF"
The display is showing a message for scheduled maintenance of the stove.
SERVICE
12:0022
.
c
1
WHAT TO DO
- Call the authorised technical assistance centre. DT2012686-00
H072047UK0 / DT2001513 – 04
35
To Next Page
Loading...
