SHUT DOWN DURING THE START PHASE
Description Display message
The stove is in START PHASE I and is shut down by pressing the ON/OFF key.
The readout “EMPTY BRAZIER” appears.
1
EMPTY
BRAZIER
Completely empty the brazier before setting a new start-up.
By pressing the ON/OFF key, the readout disappears and the display returns to the initial display.
a Do not empty the brazier inside the hopper as there may still be unburnt pellets present.
DT2012311-00
RESTARTING DURING THE SHUTDOWN PHASE
Description Display message
SITUATION 1
The stove is in the shutdown phase and the message “SHUTDOWN” appears on the display.
If the stove is to be started again by pressing the ON/OFF key, the message “COOLING” appears on
the display: this indicates that you must wait for the necessary cooling period.
When it has cooled down, the message “OFF” appears on the display.
To start it again, press the ON/OFF key once more.
SITUATION 2
The stove is in the shutdown phase and the message “OFF” has just appeared on the display.
If the stove is to be started again by pressing the ON/OFF key, the message “COOLING” appears on
the display: this indicates that the stove is still hot and you must wait for the necessary cooling period.
When it has cooled down, the message “OFF”. appears on the display.
To start it again, press the ON/OFF key once more.
COOLING
12:0022
.
c
1
DT2012312-00
H072047UK0 / DT2001513 – 04
34
To Next Page
Loading...
