Piazzetta MP 973 - Start-up and Encoder Faults; No Lit Start-up Faults (E9, E14); Encoder Fault (E12)

NO LIT
Description Display message
- The message NO LIT E9 is shown on the display.
This means that the smoke probe has not detected the necessary temperature increase during start
up.
- The alarm beep sounds.
E7
1 2:0022
.
c
1
!
NO LIT
E9
1 2:0022
.
c
1
!
- The message NO LIT E14 appears on the display.
This indicates that during start up the stove has not reached the start temperature limit.
- The alarm beep sounds.
1 2:0022
.
c
1
!
NO LIT
E14
WHAT TO DO
- Press and briey hold the ON/OFF key to deactivate the appliance.
- The beep stops.
- Check the pellet load in the hopper and ll it if necessary.
- Make sure that the brazier is not obstructed with pellets of combustion residuals.
- If the problem persists please contact the Technical Assistance Centre.
DT2012655-00
ENCODER
Description Display message
- The message E12 is shown on the display.
The encoder signals a fault.
- The alarm beep sounds.
E12
!
1
12:0022
.
c
WHAT TO DO
- Press and briey hold the ON/OFF key to deactivate the appliance.
- The beep stops.
- Call the Technical Assistance Centre.
DT2012680-00
H072047UK0 / DT2001513 – 04
54
English