Pioneer DVR-310 - Initialize Settings; Finalize Settings

The Disc Setup menu
10
69
En
Initialize settings
You can initialize a DVD-RW disc for either VR mode
recording or Video mode recording. The first time you
load a new DVD-RW disc, it will be automatically
initialized for recording according to the DVD-RW Auto
Init. setting in the Initial Setup menu (see page 84).
The initialize menu here lets you reinitialize a disc, for
example if you want to change the recording format of
the disc. See
Initializing a DVD-RW disc on page 55 for
detailed instructions.
Finalize settings
Finalize
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
See
Playing your recordings on other DVD players on
page 54 for detailed instructions.
Undo Finalize
You can undo the finalization on DVD-RW discs recorded
on this recorder in Video mode. You need to do this if you
want to record more material or edit material already on
the disc.
You can also undo the finalization of VR mode discs
which have been finalized on other DVD recorders. If
when you load a disc the message
This disc cannot be
recorded. Undo the finalization
is displayed, use this
command to be able to record on the disc using this
recorder.
1 From the Disc Setup menu, select ‘Finalize’, then
‘Undo Finalize’ from the finalize options.
2 Select ‘Start’.
Note
• You cannot finalize a disc or use the Undo Finalize
command if the TV line system of the disc is different
to the current setting of the recorder. See
Input Line
System
on page 74 for how to change the recorder’s
setting.
DVD-RW
DVD-R DVD-RW
DVD-RW
DVR-03_RD.book 69 ページ ２００３年９月１８日 木曜日 午後９時２分