The Initial Setup menu
12
76
En
1 Select ‘Manual CH Setting’, then ‘Next Screen’.
Press
ENTER
to go to the country setting screen.
2 Select your country.
3 Press ENTER to go to the manual channel setting
screen.
• Use the
CHANNEL +/–
buttons, number buttons or
the
SMART JOG
on the front panel to change
channels.
From this screen there are eight parameters you can set:
•
Skip
– If you want to skip the displayed channel
(because there is no station assigned to that
channel), change the
Skip
setting to
On
.
•
CH System
– Set the channel system used in your
area or region.
•
Channel
– Change the channel number assigned to
the current preset.
•
AFT
(Auto Fine Tune) – When set to
On
, the station is
automatically tuned; set to
Off
to manually fine tune
(see below).
•
Level
– Set the AFT level (see above).
•
Sound System
– Set the sound system used for the
current channel.
•
Name
– Move the cursor right then input a name for
the current station, (up to five characters) then press
ENTER
.
Channel Swapping
The preset swap feature lets you swap the channel
assignments of different programs. This is so that you
can group together station presets which naturally go
together.
1 Select ‘Channel Swapping’.
2 Select ‘Next Screen’ to go to the swap presets
screen.
3 Use the
/
(cursor up/down) buttons to select
a preset station to swap.
• Use the
PREV/NEXT
buttons to display the previous/
next page.
4 Press
(cursor right), then select a preset
station to swap with the first preset.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Auto Channel Setting
Manual CH Setting
Channel Swapping
VCR Plus+ CH Setting
Next Screen
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Auto Channel Setting
Manual CH Setting
Channel Swapping
VCR Plus+ CH Setting
Manual Channel Setting
Manual Channel Setting
Country
Mexico
Initial Setup
Off
Skip
CH System
Channel
AFT
Level
Sound System
Name
US
2
On
M/N
Pr 1
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Auto Channel Setting
Manual CH Setting
Channel Swapping
VCR Plus+ CH Setting
Next Screen
Initial Setup
11
Pr System CH
Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
Pr System CH
Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
[1] 1/17 [2] 1/17
Swap Preset
Initial Setup
51
Pr System CH
Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
Pr System CH
Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
[1] 1/17 [2] 1/17
Swap Preset
Initial Setup
53
Pr System CH
Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
Pr System CH
Name
1 M/N CC40
2 M/N 2
3 M/N 3
4 M/N 4
5 M/N 5
6 M/N 6
[1] 1/17 [2] 1/17
Swap Preset
Initial Setup
DVR-03_RD.book 76 ページ 2003年9月18日 木曜日 午後9時2分