3. Select the Export to field.
a. Select the folder on the USB drive where you want to export the file.
b. Select Open.
4. Select OK to export the communication settings.
5. The system will alert you when the export is complete. Select OK.
6. Select Done to return to the Home screen.
Viewing the IntelliLink® settings
This option allows you to view the connection parameters for your postage account. The IntelliLink®
settings are viewed within the Settings application.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select Internet & Network from the list on the left side of the screen.
3. Select IntelliLink. The Postage by Phone postage account number, Distributor URL, and Backup
data center URL for the system are displayed. These fields are automatically populated by Pitney
Bowes.
l If necessary, select a field, type in the parameter and select OK.
Note:
Changes to the IntelliLink® parameters may result in errors when connecting to Pitney
Bowes.
l If necessary, select the Reset to Factory Settings button to revert to the default values for
these fields.
4. Select the Home button to return to the Home screen.
Viewing DI900™/DI950™ inserter communication settings
This option allows you to view the communication settings for your inserting system interface. The
communication settings are viewed within the Settings application.
System Setup
Pitney Bowes Operator Guide February,2018 Page 221 of 349
To Next Page
Loading...
