1. Select the Settings button in the Mailing tile on the Home screen.
2. The Settings screen displays. Select Internet & Network from the list on the left side of the
screen.
3. Select Inserting System.
Performing a Network Test
This option allows you to perform a test to ensure your Connect+® Series / SendPro® P-Series system
can connect successfully to the Pitney Bowes infrastructure. This feature is used to help diagnose any
potential connectivity issues.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select Internet & Network from the list on the left side of the screen.
3. Select Network Test.
4. Select the Network Status tab.
5. Select Perform Connection Test. The machine then checks:
l Active Network. This is used to ensure that your system is successfully connected to an active
network and has been assigned an IP address.
l Connect to PB. This ensures that connections are possible to all relevant areas of the Pitney
Bowes infrastructure.
l Speed Test. This performs a test of your upload and download speed.
Should you need to enter credentials for a Proxy server, these can be applied using the Proxy Settings
tab, entering the relevant information and then select Apply Settings.
6. Select the Home button to return to the Home screen.
System Setup
Pitney Bowes Operator Guide February,2018 Page 222 of 349
To Next Page
Loading...
