3. Select Create new job....
4. Select Weigh-Rate-Count.
5. Select OK. The job appears in a new job tab.
6. Select the appropriate counter and then select OK.
l Total - Weigh-Rate-Count: total number of pieces for the current job.
l Resettable - Weigh-Rate-Count: the total number of pieces run since you reset the counter.
7. If necessary, add a graphic to the job.
8. Select an account.
9. If necessary, select a surcharge.
10. Select the appropriate class, carrier, or special services.
11. Select Start to begin feeding and counting envelopes.
12. If you want to save this job, select Save as.
13. Type in the job name and select OK.
Statement of Manifest
You can print an indicia as evidence of payment for the other types of mailings and shipments including:
l Multiple parcel shipments
l Bulk mailings using pre-printed permit envelopes
1. Select the Options button at the bottom of the Run Mail screen.
2. Select Create new job.... and then select Statement of Manifest.
3. Enter the mailing/manifest amount.
Note:
If the amount exceeds the High postage value set for your system you are prompted to confirm or
re-enter the amount.
4. Select OK. The job appears in a new job tab.
Using jobs
Pitney Bowes Operator Guide February,2018 Page 57 of 349
To Next Page
Loading...
