6. To save the job, select the Save As link at the top of the screen.
7. Type in the job name and select OK.
Sealing envelopes without printing postage
You can create a job to seal envelopes without printing postage. If your system uses accounting, a piece
count will be included in accounting reports.
If you have already created a seal only job, open the job and begin running mail.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select the Options button.
3. Select Create new job....
4. Select Seal only, no Printing.
Note:
Print date is off in Seal only job.
5. Select OK. The job appears in a new job tab.
6. Select Start to begin feeding and sealing envelopes.
7. If you want to save this job, select Save as.
8. Type in the job name and select OK.
Weighing, rating and counting mail without printing postage
If your system uses accounting, you can create a job to weigh, rate and count mail without printing
postage. In addition, you can add a graphic ad to the mail piece. The weighing and rating information, as
well as the piece count, will be included in accounting reports.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select the Options button.
Using jobs
Pitney Bowes Operator Guide February,2018 Page 56 of 349
To Next Page
Loading...
