Note:
When printing the date and/or time, the sealer is set to off.
Follow the steps below to create a received date and time job.
1. Select the Options button at the bottom of the Run Mail screen.
2. Select Create new job... and then select Received date and time.
3. Select OK.
4. Select Start or Tape.
5. To save the job, select the Save As link at the top of the screen.
6. Type in the job name and select OK.
Printing a permit
You can print a permit on a piece of mail instead of an indicia. A permit is a postal mark containing a
permit number that provides you with special processing or discount rates. You get the permit(s) from the
Canada Post.
1. Select the Options button at the bottom of the Run Mail screen.
2. Select Create new job... and then select Permit job.
3. Select OK. A new job tab appears. The Mail Information list box is populated with the required
permit job settings.
4. Select the Company Name or Permit Number button in the Mail Information list box.
a. Enter either the permit number or the company name.
b. Select OK.
5. Select the Class button.
a. Select the appropriate class.
b. Select OK.
Using jobs
Pitney Bowes Operator Guide February,2018 Page 55 of 349
To Next Page
Loading...
