6. Wait 2 minutes. The screen should turn off after 10 seconds.
7. Plug the power cord back in directly into a wall outlet.
8. Quickly tap and release the power button to turn the device back on.
9. Tap Settings.
10. Tap Wired (Ethernet).
11. Tap DHCP.
12. Tap Connect.
Static
1. Tap Settings.
2. Tap Wired.
3. Select Static.
4. Contact your IT department to obtain the settings you will need to enter for your device. The
values needed are:
l
IP Address
l
Netmask
l
Gateway
l
DNS Address.
2 • Connectivity
Pitney Bowes User Guide November 2021 26
To Next Page
Loading...
